Công ty Kế Hoa chuyên nhập khẩu và phân phối các sản phẩm hãng Panasonic chính hãng, giá rẻ, chất lượng tốt 

Một số loại bộ lập trình PLC Panasonic mà công ty Kế Hoa giới thiệu:

 

Khối đế gắn PLC Panasonic FP2-BP10EH  

Thông số kỹ thuật:

• A high-performance model for high-speed operation
• Large programming capacity of up to 120k steps
• Combine modules like building blocks
• Optional small PC card is also available
• Built-in comment and real-time clock functions
• 8 slots (for expansion)

Các sản phẩm tương tự: FP2-BP05 , FP2-BP07, FP2-BP09, FP2-BP12, FP2-BP14, FP2-BP10EH  , FP2-BP11MH

 Khối PLC Panasonic AFP0RC32T

Thông số kỹ thuật:

• Large program memory (32k commands)
• Large data memory (32k words)
• Efficient motion control functions
  – 50kHz fast counter input
  – 100kHz pulse output
  – Convenient positioning commands
• Fastest processing time, 0.32µs/basic command
• Real-time clock
• Compact design (W 30 x H 90 x D 60mm)
• Top communication performance thanks to 3 possible serial interfaces on the CPU
• MODBUS RTU Master/Slave standard in all CPUs
• Built-in memory(Program capacity) : Flash EEPROM(32 k steps)
• Number of I/O points : 32(Input: 16,Output: 16)
• Power supply voltage : 24 V DC
• Input : 24 V DC Sink / Source (± common)
• Output : NPN transistor: 0.2 A
• Connection method : MIL connector

Khối PLC Panasonic FP0H Series AFP0HC32ET CPU Module

Thông số kỹ thuật:

• Available interfaces: 2 Ethernet ports (Ethernet type only), 1 RS232C port, 1 USB port. The Ethernet type is compatible with EtherNet/IP, Modbus-TCP and MC protocol and can  be connected easily to all kinds of robots and PLCs. In addition, communication cassettes can be installed
• The communication cassette system extends the serial communication functionality of the CPU without the need to buy or install a dedicated communication unit. There are 4 communication cassettes available: RS232C, RS232C x 2, RS485, RS232C and RS485. In addition, the shared program and data register memory means there is no need to buy a more expensive unit with more data space
• The FPΣ (Sigma) and the FP0H without Ethernet functionality have nearly the same size so that it is easy to replace the FPΣ (Sigma) with the FP0H. Ladder programs written for FPΣ (Sigma) can be converted for FP0H to facilitate the replacement
• SD memory cards can be used to store programs for and from the PLC. This makes it easy to update programs quickly if necessary. In addition, they can be used for the logging / trace function. Logging can be performed with 4 simultaneously active files using various triggers such as bit, interval, instruction, and time
• Number of Inputs and Type : 16 – Digital
• Number of Outputs and Type : 16 – Solid State
• Voltage – Supply : 24VDC
• Memory Size : 64K Words

Khối PLC Panasonic AFP0RF32MT dòng FP0R

Thông số kỹ thuật:

• Ultra high-speed processing enhances productivity
  An ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step thereafter.
• Large programming capacity of 16k or 32k steps
• Generous data register of up to 12k or 32k words
• USB2.0 port provides high-speed program transfer
• Highly advanced, built-in positioning functions
  Jog operation
  Individual settings for acceleration and deceleration for ramp functions
  Target speed can be changed by an external signal input during jog operation or trapezoidal control
  Can read encoder signals of up to 50kHz (pulse frequency measurement)
  6 channels high-speed counters and 4-axis pulse outputs can be used simultaneously
• FP0R units provide various kinds of networking communication using a built-in interface or expansion units
  Ethernet (Modbus TCP/IEC60870), Profibus, CC-Link, MEWNET-W0, C-NET, RS232C or RS485 serial communication
• Các sản phẩm tương tự: AFP0RF32CT, AFP0RF32CP, AFP0RC32CT, AFP0RC32CP, AFP0RC16CT, AFP0RC16T, AFP0RC16CP, FP0RE16T

Khối PLC Panasonic AFP0HC32T dòng FP0H

Thông số kỹ thuật:

• Available interfaces: 2 Ethernet ports (Ethernet type only), 1 RS232C port, 1 USB port. The Ethernet type is compatible with EtherNet/IP, Modbus-TCP and MC protocol and can be connected easily to all kinds of robots and PLCs. In addition, communication cassettes can be installed.
• The communication cassette system extends the serial communication functionality of the CPU without the need to buy or install a dedicated communication unit. There are 4 communication cassettes available: RS232C, RS232C x 2, RS485, RS232C and RS485. In addition, the shared program and data register memory means there is no need to buy a more expensive unit with more data space.
• The FPΣ (Sigma) and the FP0H without Ethernet functionality have nearly the same size so that it is easy to replace the FPΣ (Sigma) with the FP0H. Ladder programs written for FPΣ (Sigma) can be converted for FP0H to facilitate the replacement.
• D memory cards can be used to store programs for and from the PLC. This makes it easy to update programs quickly if necessary. In addition, they can be used for the logging / trace function. Logging can be performed with 4 simultaneously active files using various triggers such as bit, interval, instruction, and time.
• Number of Inputs and Type : 16 – Digital
• Number of Outputs and Type : 16 – Solid State
• Voltage – Supply : 24VDC
• Memory Size : 32K Words

 Khối mở rộng I/O PLC Panasonic AFP0HXY64D2T dòng FP0H

Thông số kỹ thuật:

• Available interfaces: 2 Ethernet ports (Ethernet type only), 1 RS232C port, 1 USB port. The Ethernet type is compatible with EtherNet/IP, Modbus-TCP and MC protocol and can be connected easily to all kinds of robots and PLCs. In addition, communication cassettes can be installed
• The communication cassette system extends the serial communication functionality of the CPU without the need to buy or install a dedicated communication unit. There are 4 communication cassettes available: RS232C, RS232C x 2, RS485, RS232C and RS485. In addition, the shared program and data register memory means there is no need to buy a more expensive unit with more data space
• The FPΣ (Sigma) and the FP0H without Ethernet functionality have nearly the same size so that it is easy to replace the FPΣ (Sigma) with the FP0H. Ladder programs written for FPΣ (Sigma) can be converted for FP0H to facilitate the replacement
• SD memory cards can be used to store programs for and from the PLC. This makes it easy to update programs quickly if necessary. In addition, they can be used for the logging / trace function. Logging can be performed with 4 simultaneously active files using various triggers such as bit, interval, instruction, and time
• Number of Inputs and Type : 32 – Digital
• Number of Outputs and Type : 32 – Solid State
• Voltage – Supply : 5 ~ 24VDC
• Operating Temperature : 0°C ~ 55°C

Khối PLC Panasonic AFP7CPS21 dòng FP7

Thông số kỹ thuật:

• Equipped with a large memory capacity (up to 220k program steps or up to 500k data words) and a high-speed processor (11ns/step)
• The standard CPU boards with Ethernet interface offer connectivity without limits, from remote programming to monitoring and data logging to FTP server, MEWTOCOL (client/server), EtherNet/IP  and Modbus TCP. Together with the Mini-USB and the RS232C port, it is possible to connect up to 272 devices. Supported services include FTP client/server (file exchange), HTTP Client (data exchange / services with a HTTP server / cloud), and sending e-mails with attachments.
  Operational and program editing events are logged. Automatic logs of program download and upload are useful, especially for program debugging.
• Power supply : 24V DC or FP power supply unit
• Input : 12–24V DC, 24V DC (sink/source)
• Output : Relay 2–5A, transistor: 0.1–0.5A (varies with different models)
• Number of inputs/outputs : 1024
• Sản phẩm nâng cấp: AFP7CPS31E

Khối nguồn cấp Panasonic AFP7PSA1 dòng FP7

Thông số kỹ thuật:

• Equipped with a large memory capacity (up to 220k program steps or up to 500k data words) and a high-speed processor (11ns/step)
• The standard CPU boards with Ethernet interface offer connectivity without limits, from remote programming to monitoring and data logging to FTP server, MEWTOCOL (client/server), EtherNet/IP  and Modbus TCP. Together with the Mini-USB and the RS232C port, it is possible to connect up to 272 devices. Supported services include FTP client/server (file exchange), HTTP Client (data exchange / services with a HTTP server / cloud), and sending e-mails with attachments
• Built-in program backup. Production can resume in the event of fault. Original program is immediately to hand
• Operational and program editing events are logged. Automatic logs of program download and upload are useful, especially for program debugging
• Hour meter operation. The built-in clock/calendar function can be adjusted via Ethernet
• Rated input voltage : 100 to 240 V AC
• Allowable input voltage range : 85 to 264 V AC
• Input power supply frequency : 47 to 63 Hz
• Input current : 0.75 A or less
• Rated output current (at 24 V): 1.0 A

Khối vào ra  I/O Panasonic AFP7Y16R dòng FP7

Thông số kỹ thuật:

• Equipped with a large memory capacity (up to 220k program steps or up to 500k data  words) and a high-speed processor (11ns/step)
• The standard CPU boards with Ethernet interface offer connectivity without limits, from remote programming to monitoring and data logging to FTP server, MEWTOCOL (client/server), EtherNet/IP  and Modbus TCP. Together with the Mini-USB and the RS232C port, it is possible to connect up to 272 devices. Supported services include FTP client/server (file exchange), HTTP Client (data exchange / services with a HTTP server / cloud), and sending e-mails with attachments.
• Built-in program backup. Production can resume in the event of fault. Original program is immediately to hand.
• Operational and program editing events are logged. Automatic logs of program download and upload are useful, especially for program debugging.
• Hour meter operation. The built-in clock/calendar function can be adjusted via Ethernet.
• Number of points : 16
• Connection method : Terminal block
• Relay, 2A/point, 5A/common, 16 points/common

Khối mở rộng đầu vào Panasonic AFP0RE16X dòng FP0R

Thông số kỹ thuật:

• Ultra high-speed processing enhances productivity
• An ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step thereafter. The FP0R is ideal for positioning and process automation applications, e.g. in labeling machines.
• Large programming capacity of 16k or 32k steps
• Generous data register of up to 12k or 32k words
• Independent comment memory
• USB2.0 port provides high-speed program transfer
• Highly advanced, built-in positioning functions
• – Jog operation
• – Individual settings for acceleration and deceleration for ramp functions
• – Target speed can be changed by an external signal input during jog operation or trapezoidal control
• – Can read encoder signals of up to 50kHz (pulse frequency measurement)
• – 6 channels high-speed counters and 4-axis pulse outputs can be used simultaneously
• FP0R units provide various kinds of networking communication using a built-in interface or expansion units
• Ethernet (Modbus TCP/IEC60870), Profibus, CC-Link, MEWNET-W0, C-NET, RS232C or RS485 serial communication
• Input 16 points DC, MIL connector type

Khối mở rộng đầu ra Panasonic AFP0RE8YT dòng FP0R

Thông số kỹ thuật:

• Ultra high-speed processing enhances productivity
• An ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step thereafter. The FP0R is ideal for positioning and process automation applications, e.g. in labeling machines.
• Large programming capacity of 16k or 32k steps
• Generous data register of up to 12k or 32k words
• Independent comment memory
• USB2.0 port provides high-speed program transfer
• The new F-type FP0R provides maintenance-free and complete backup of all data without requiring a battery. Industry’s first!
• Highly advanced, built-in positioning functions
• Transistor output (NPN) 8 points, MIL connector type
• Sản phẩm tường tự: AFP0RE8YRS

Khối vào ra PLC Panasonic AFP7AD8 dòng FP7

Thông số kỹ thuật:

• Equipped with a large memory capacity (up to 220k program steps or up to 500k data words) and a high-speed processor (11ns/step)
• The standard CPU boards with Ethernet interface offer connectivity without limits, from remote programming to monitoring and data logging to FTP server, MEWTOCOL (client/server), EtherNet/IP  and Modbus TCP. Together with the Mini-USB and the RS232C port, it is possible to connect up to 272 devices. Supported services include FTP client/server (file exchange), HTTP Client (data exchange / services with a HTTP server / cloud), and sending e-mails with attachments
  Built-in program backup. Production can resume in the event of fault. Original program is immediately to hand
• Operational and program editing events are logged. Automatic logs of program download and upload are useful, especially for program debugging.
• Hour meter operation. The built-in clock/calendar function can be adjusted via Ethernet.
• Number of channels : 8
• Voltage/current, conversion rate 25μs/channel, resolution max. 16 bit, accuracy max. ±0.1% F.S. (at 25°C)

Khối mở rộng I/O PLC Panasonic AFP0HXY64D2T dòng FP7

Thông số kỹ thuật:

• Equipped with a large memory capacity (up to 220k program steps or up to 500k data words) and a high-speed processor (11ns/step)
• The standard CPU boards with Ethernet interface offer connectivity without limits, from remote programming to monitoring and data logging to FTP server, MEWTOCOL (client/server), EtherNet/IP  and Modbus TCP. Together with the Mini-USB and the RS232C port, it is possible to connect up to 272 devices. Supported services include FTP client/server (file exchange), HTTP Client (data exchange / services with a HTTP server / cloud), and sending e-mails with attachments.
  Built-in program backup. Production can resume in the event of fault. Original program is immediately to hand.
• Operational and program editing events are logged. Automatic logs of program download and upload are useful, especially for program debugging.
• Hour meter operation. The built-in clock/calendar function can be adjusted via Ethernet.
• Type : DC input, transistor output, sink (NPN)
• Number of points: Input: 32, Output: 32
• Connection method : MIL connector
• Input: 24V DC, 32 points/common
  Output: load current 0.3A/0.1A, 3.2A/common, 32 points/common

Khối mở rộng I/O PLC Panasonic FP2-XY64D2T dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device.
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH
• Input : 32
• Voltage : 24V DC
• Response time OFF-> ON : 0.3ms or less
• Output : 32
• I/O number : Transistor NPN
• Voltage : 5 to 24V DC
• Rating : 0.1A (12-24V DC)

Khối mở rộng I/O PLC Panasonic FP2-X64D2 dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data
• These functions, optional with the FP2, are built right into the FP2SH
• I/O Number : 64
• Voltage : 24V DC
• Connection : Connector

Khối PLC CPU Panasonic FP2-C2L dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time  and high-speed device
• Large programming capacities of 60k and 120k are available, depending on the model
• I/O units, intelligent units, power supply units and backplanes can be used together for the  FP2 and the FP2SH. I/O units can be located anywhere on the backplane
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data
• These functions, optional with the FP2, are built right into the FP2SH
• Inputs/outputs : Central: max. 1600 (with 25 modules), Locally expanded: max. 8172 (via MEWNET-F or S-LINK)
• Operating speed : 0.03µs per basic instruction
• Time interrupt : 0.5ms to 1.5s

Khối PLC Panasonic FP2-AD8VI dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device.
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the  FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH
• Input range : +/-10V, 1-5V, +/-20mA, 4-20mA
• Conversion speed : 500µs/ch
• Accuracy : +/-1.0%

Khối PLC Panasonic AFPG2653HTM dòng FP-Sigma

Thông số kỹ thuật:

• Large program memory (32k commands)
• Large data memory (32k words)
• Efficient motion control functions
  – 50kHz fast counter input
  – 100kHz pulse output
  – convenient positioning commands
• Fastest processing time, 0.32µs/basic command
• Real-time clock
• Compact design (W 30 x H 90 x D 60mm)
• Top communication performance thanks to 3 possible serial interfaces on the CPU
• MODBUS RTU Master/Slave standard in all CPUs
• Built-in memory (Program capacity) : Flash EEPROM(32 k steps)
• Input 16 points DC, transistor output (PNP) 12 points I/O control
  points when expanded: 380 points max
  Built-in linear interpolation and circular interpolation functions
• Sản phẩm tương tự: AFPG2543HTM, AFPG2423HTM

Khối PLC Panasonic AFP0RC14RS dòng FP0R

Thông số kỹ thuật:

• Ultra high-speed processing enhances productivity
• An ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step thereafter. The FP0R is ideal for positioning and process automation applications, e.g. in labeling machines.
• Large programming capacity of 16k or 32k steps
• Generous data register of up to 12k or 32k words
• Independent comment memory
• USB2.0 port provides high-speed program transfer
• Highly advanced, built-in positioning functions
• Input 8, relay output 6
• Sản phẩm tương tự: AFP0RC14CRS, AFP0RC10RS, AFP0RC10CRS, AFP0RE8YRS

Khối  mở rộng  bộ nhớ FP2-EM7 PLC Panasonic dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time  and high-speed device.
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH
• Comment input :  not  available
• Clock/calendar : not available
• Expansion RAM : not available
• ROM socket :  available
• Sản phẩm tương tự: FP2-EM7, FP2-EM6, FP2-EM5, FP2-EM4, FP2-EM3, FP2-EM2, FP2-EM1

Khối PLC Panasonic ngõ ra Analog AFP0RDA4 dòng FP0R

Thông số kỹ thuật:

• Ultra high-speed processing enhances productivity
• An ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step thereafter. The FP0R is ideal for positioning and process automation applications, e.g. in labeling machines
• Large programming capacity of 16k or 32k steps
• Generous data register of up to 12k or 32k words
• Independent comment memory
• USB2.0 port provides high-speed program transfer
• Highly advanced, built-in positioning functions
• Voltage mode : -10 to +10 V 14 bits, -5 to +5 V 14 bits, 0 to +10 V 14 bits, 0 to +5 V 14 bits
• Current mode :0 to 20mA 14 bits,4 to 20mA 14 bits
• Resolution : 14-bit
• No of outputs : 4
• Conversion speed : 500µs / ch
• Sản phẩm tương tự: AFP0RDA4, AFP0RAD4, AFP0RA21

Khối PLC Panasonic AFP0RF32MT dòng FP-Sigma

Thông số kỹ thuật:

• Large program memory (32k commands)
• Large data memory (32k words)
• Efficient motion control functions
  – 50kHz fast counter input
  – 100kHz pulse output
  – convenient positioning commands
• Fastest processing time, 0.32µs/basic command
• Real-time clock
• Compact design (W 30 x H 90 x D 60mm)
• Top communication performance thanks to 3 possible serial interfaces on the CPU
• MODBUS RTU Master/Slave standard in all CPUs
• Built-in memory(Program capacity) : Flash EEPROM(32 k steps)
• Number of I/O points : 32(Input: 16,Output: 16)
• Power supply voltage : 24 V DC
• Input : 24 V DC Sink / Source (± common)
• Output : NPN transistor: 0.2 A
• Connection method : MIL connector

Khối Panasonic PLC Thermocouple Input AFPX-TC2 dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
• providing a real-time clock
• – Programme update in a remote location is easy
• – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• 2 thermocouple inputs (insulated) K/J type

Khối Panasonic PLC RTD Input AFPX-RTD2 dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Max. I/O expansion of 300 channels and further expansion with function expansion  cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
• providing a real-time clock
• – Programme update in a remote location is easy
• – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• 2-channel RTD inputs (insulated), Pt100 (-200ºC to 850ºC)

Khối Panasonic PLC Pulse Accessory AFPX-PLS dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Great expandability with a wide variety of options
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
• providing a real-time clock
• – Programme update in a remote location is easy
• – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• 2 high speed counter inputs + 1 pulse output

Khối Panasonic PLC Output Cassette AFPX-TR8 dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Great expandability with a wide variety of options
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
• providing a real-time clock
• – Programme update in a remote location is easy
• – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• 8 outputs, transistor NPN 0,3A
• Sản phẩm tương tự: AFPX-TR6P

Khối Panasonic PLC Input Cassette AFPX-IN8 dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Great expandability with a wide variety of options
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
• providing a real-time clock
• – Programme update in a remote location is easy
• – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• 8-point input of 24 V DC, bi-directional (sink / source)
• Sản phẩm tương tự: AFPX-IN4T3

Khối Panasonic PLC Analog Output Cassette AFPX-DA2 dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Great expandability with a wide variety of options
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
• providing a real-time clock
• – Programme update in a remote location is easy
• – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• 2 analog outputs (insulated) 0-10V, 0-20mA

Khối PLC Panasonic Analog I/O Cassette AFPX-A21 dòng FP2

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Great expandability with a wide variety of options
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
• providing a real-time clock
• – Programme update in a remote location is easy
• – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• 2 inputs (insulated) 0-5V, 0-10V, 0-20mA;
• 1 output (insulated) 0-10V, 0-20mA

Khối PLC Panasonic AFPX-AD2 dòng FP2

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
  providing a real-time clock
  – Programme update in a remote location is easy
  – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• Compatible with all FP Series PLCs from Panasonic
  The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3.
• 2 inputs (non-insulated) 0-10V, 0-20mA
• 2-point analog input, 0 to 10 V / 0 to 20 mA, 12-bit, 2 ms / 2 channels (non-insulated)

Khối PLC Panasonic FPG-COM3 dòng FP-Sigma

Thông số kỹ thuật:

• Large program memory (32k commands)
• Large data memory (32k words)
• Efficient motion control functions
• 50kHz fast counter input
• 100kHz pulse output
• Convenient positioning commands
• Fastest processing time, 0.32µs/basic command
• Real-time clock
• Compact design (W 30 x H 90 x D 60mm)
• Top communication performance thanks to 3 possible serial interfaces on the CPU
• MODBUS RTU Master/Slave standard in all CPUs
• 1-channel RS485
• Cassette for control unit installation
• PLC linking between FPΣs or communication with devices with RS485 interface possible
• Các sản phẩm tương tự: FPG-COM4

Khối PLC Panasonic AFPG801 dòng FP-Sigma

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
  providing a real-time clock
  Programme update in a remote location is easy
  Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• Cassette for control unit installation
  Enables communications with devices with RS-232C interface

Khối PLC Panasonic AFPG802 dòng FP-Sigma

Thông số kỹ thuật:

• Large program memory (32k commands)
• Large data memory (32k words)
• Efficient motion control functions
  – 50kHz fast counter input
  – 100kHz pulse output
  – convenient positioning commands
• Fastest processing time, 0.32µs/basic command
• Real-time clock
• Compact design (W 30 x H 90 x D 60mm)
• Top communication performance thanks to 3 possible serial interfaces on the CPU
• MODBUS RTU Master/Slave standard in all CPUs
• Cassette for control unit installation
• Enables communications with devices with RS-232C interface

Khối PLC Panasonic Communication Cassette AFPX-COM5 dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• RS232C 1 channel + Ethernet 1 channel
• Ethernet 1 channel (10BASE-T, 100BASE-TX) and RS232C 1 channel (non-insulated)

Khối nguồn PLC Panasonic FP2-PSA1 dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device.
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH
• Voltage : 100 – 120V AC
• Rating (at 5V side) : 2.5A

Khối nguồn PLC Panasonic FP2-PSA2 dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device.
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH
• Voltage : 200 – 240V AC
• Rating (at 5V side) : 2.5A
• Sản phẩm tương tự: FP2-PSA3

Khối nguồn PLC Panasonic FP2-PSD2 dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device
• Large programming capacities of 60k and 120k are available, depending on the model
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH.
• Voltage : 24V DC
• Rating (at 5V side) : 5A

Khối điểu khiển vị trí PLC Panasonic FP2-PN8AN dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device.
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH.
• 8 axes positioning unit RTEX
• Sản phẩm tương tự: FP2-PN4AN, FP2-PN2AN

Khối PLC Panasonic FP2-Y16R dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device.
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH
• I/O Number : 16 relay
• Voltage : 250V AC / 2A
• Connection : terminal

Khối PLC Panasonic FP2-XY64D7T dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device
• Large programming capacities of 60k and 120k are available, depending on the model
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data
• These functions, optional with the FP2, are built right into the FP2SH.
• Input : 32
• Input Voltage : 24V DC
• Output : 32
• Output voltage : 0.1 A (12 to 24 V DC), 50 mA (5 V DC)
• Rating : 50mA (5V DC)
• Sản phẩm tương tự: FP2-XY64D2P, FP2-X32D2

Khối PLC Panasonic FP2-RTD dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device.
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH.
• Input range : Pt100, JPt100, JPt1000
• Conversion speed : 20ms/ch
• Accuracy : +/-0.3%

Khối PLC Panasonic FP2-PP42 dòng FP2

Thông số kỹ thuật:

• Scanning time of 1ms for 20k steps. With an operating speed at the top of its class, super high-speed processing is made possible. The result is a dramatically decreased tact time and high-speed device
• Large programming capacities of 60k and 120k are available, depending on the model.
• I/O units, intelligent units, power supply units and backplanes can be used together for the FP2 and the FP2SH. I/O units can be located anywhere on the backplane.
• The small PC card is available for programming backup or data memory expansion. This allows you to process great amounts of data.
• These functions, optional with the FP2, are built right into the FP2SH.
• Line driver output, 4 axis
• Sản phẩm tương tự: FP2-PP41, FP2-PP21, FP2-PP2

Khối PLC Panasonic FPG-C32TH dòng FP-Sigma

Thông số kỹ thuật:

• Large program memory (32k commands)
• Large data memory (32k words)
• Efficient motion control functions
  – 50kHz fast counter input
  – 100kHz pulse output
  – Convenient positioning commands
• Fastest processing time, 0.32µs/basic command
• Real-time clock
• Compact design (W 30 x H 90 x D 60mm)
• Top communication performance thanks to 3 possible serial interfaces on the CPU
• MODBUS RTU Master/Slave standard in all CPUs
• Input 16 points DC, transistor output (NPN) 16 points I/O control
  points when expanded: 128 points max
• Sản phẩm tương tự: FPG-C32TTM, FPG-C32T2H, FPG-C32T2HTM

Khối pin nuôi PLC Panasonic AFPG804 dòng FP-Sigma

Thông số kỹ thuật:

• FPS battery, for memory backup & clock functions

Khối mở rộng PLC Panasonic AFPX-E30TD dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
  providing a real-time clock
  – Programme update in a remote location is easy
  – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• 16-point input of 24 V DC, 0.5 A / 5 to 24 V DC, 14-point output of transistor (NPN)
  Remarks; Possible to connect up to 8 units including E16 and AFPX-EFP0. With an
  8 cm 3.15 in extension cable
• Sản phẩm tương tự: AFPX-E30T, AFPX-E30RD, AFPX-E16X, AFPX-E16T, AFPX-E14YR

Dây kết nối PLC Panasonic FP2-EC dòng FP2

Dây kết nối PLC Panasonic AFPX-EC80 dòng FP-X

Thông số kỹ thuật:

Dài tới 80 cm

Sản phẩm tương tự: AFPX-EC08

Khối PLC Panasonic AFPX-C60T dòng FP-X

• Thông số kỹ thuật:
• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
  providing a real-time clock
  – Programme update in a remote location is easy
  – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• Power supply : 100-240 V AC
• Program capacity : 32 k steps
• Potentiometer :  4-point
• USB port : Available
• 32-point input of 24 V DC, 0.5 A / 5 to 24 V DC, 28-point output of transistor (NPN)
• Sản phẩm tương tự: AFPX-C40T, AFPX-C38AT, AFPX-C30T, AFPX-C30R, AFPX-C30P, AFPX-C14T, AFPX-C14R, AFPX0-L60R, AFPX0-L40MR, AFPX0-L30R, AFPX0-L14R, AFPX-E30R, AFPX-E16R, AFPX-C60R, AFPX-C60P, AFPX0L40R

Khối PLC Panasonic AFPX-C60TD dòng FP-X

Thông số kỹ thuật:

• High-speed scan of 0.32µs for a basic instruction (1.9ms scan time for 5 ksteps)
• Programme capacity of 32k steps with a sufficient comment area
• Max. I/O expansion of 300 channels and further expansion with function expansion cassettes and expansion units
• Program protection with an 8-digit password and a function which prohibits uploads.
• The use of a communication cassette provides up to 3 serial communication ports.
• Easy direct connection with a PC via a commercial USB cable (AB type)
• Master memory function cassette makes program transfer easy while
  providing a real-time clock
  – Programme update in a remote location is easy
  – Periodical control and data logging possible
• Simultaneous 2-axis linear interpolation is possible in two pairs
• Sophisticated algorithm and floating-point operations enable high-accuracy PID control
• The FP-X can be programmed using FPWIN Pro programming software in compliance with the international standard IEC 61131-3
• I/O :32/28
• Power supply : 24V DC
• Input : 24V DC
• Output : Transistor (NPN)
• Connection : Screw Terminal
• Sản phẩm tương tự: AFPX-C60RD, AFPX-C30RD, AFPX-C30TD, AFPX-C30PD, AFPX-C14TD, AFPX-C14RD

Liên hệ:

• Công Ty TNHH Đầu Tư Xây Dựng và Thương Mại Kế Hoa
• Địa chỉ: thôn Nhật Tiến, xã Liên Châu, huyện Yên Lạc, tỉnh Vĩnh Phúc
• VP1: Thanh Trì, Hà Nội
• VP2: Lương Văn Can, Vĩnh Yên, Vĩnh Phúc

         Hotline: 0868.945.086