2 Channel, 16 Bit, 2 Analog. output (0 ~ 10 V, 0 ~ 20 mA, 4 ~ 20 mA)

Supply voltage: 24 V DC

Power consumption: 2.4 W maximum

Input signal:

• Thermocouples: J, K, R, S, T, E, N, B, U, L, TXK (L), C, PL II
• Thermal Resistors: Type Pt100, JPt100, Pt1000, Ni100, Ni1000, Cu50, Cu100, GNi1000
• Analog : 0 ~ + 50mV, 0 ~ + 5 V, 0 ~ + 10 V, 0 ~ + 20 mA, 4 ~ + 20 mA

Reaction time:

• Analog input: from 5 ms
• Thermocouple: 130 ms
• Thermal resistance: 260 ms

Control method:

• PID-controller
• PID-controller with program control Dual- mode control
• Two-position controller (ON / OFF) (except DVP02TKL-S)
• Manual mode

Control outputs:

• R: 4 relay outputs, – 250 V AC / 24 V DC, 2 A (resistive load)
• N: 4 transistor pulse outputs (NPN), 0.3 A (resistive load)
• L: 2 analog outputs (0 ~ 10 V, 0 ~ 20 mA, 4 ~ 20 mA)

Output functions: Control output, signal output (except DVP02TKL-S), relay output mode (only for DVP02TKL-S)

Alarm functions: 13 alarm modes (except DVP02TKL-S)

RS-485 communication: MODBUS ASCII / RTU, 9600 ~ 115200 bits/s

Operating ambient temperature: 0° – + 55°С

Storage temperature: -25°C – + 70°С

Humidity of the environment: 5% – 95% relative humidity (without condensation)

Liên hệ:

• Công Ty TNHH Đầu Tư Xây Dựng và Thương Mại Kế Hoa
• Địa chỉ: thôn Nhật Tiến, xã Liên Châu, huyện Yên Lạc, tỉnh Vĩnh Phúc
• VP1: Thanh Trì, Hà Nội
• VP2: Lương Văn Can, Vĩnh Yên, Vĩnh Phúc

         Hotline: 0868.945.086